Search:

I thought i would provide an update, in short it turned out to be the centre and rear diff that was the problem. I only realised it when i took the front diff out and checked and realised that front...

I do it normally every 3-4 times I take it to the track. But I have only taken it to the track 2 times this year because of the weather and I play hockey 3 times a week and my season only finished...

Hi

I have a RC8BE, it started making a loud grinding noise when I ran it in the back garden. I was meant to be racing at round 3 and 4 of the nitroxseries at NRC this weekend but needed to pull...

I have the exact motor in rc8be. It has alot more torque compared to my previous leopared 4065 1800kv. I have mine geared at 46/19 and the temps are very good, i have not had the chance to run it...

check your inbox fella

Hi

I just wanted to know when you guys have practice sessions? i have been on the website and there is no info and i have been told by people that you dont have many practice sessions.

waz

£60 including postage and buyer pays fees

I may be able to make it, what time will people be arriving?

I really need this gone.

Price drop - £65 including postage and the buyer pays fees

i would love to but i dont finish work til 10pm on a friday. The only free evening i have during the week is wednesday (the rest is split with hockey or work) & i dont think there is any racing.
...

Hi

I am selling my Mardave V12 as i orignaly got this to run in my local hobby shop in dudley. I ran it a few time but then the shop decided to close down in november/december with out any...

How about the nano-tech? 2 x 6600mah 65c pack. You can try gearing it down to 15t and keeping ur timing and punch low which will increase ur run time.

You must really have a good throttle control...

5s with 1800kv would be a handful, wouldn't that be too much? Leopard also do a 1950kv size. Did you try gearing the 1800kv higher?

Did you get better run times with 1800kv?

The castle 2200kv is fine if you are bashing or using it in a monster truck but if you are putting 2600mah in 6min heat, that motor is drinking some juice. If you went down to something like...

I don't have any experience with them but for £20 you can get a 4s 5000mah 20c hard case delivered from the uk hobby king site. I'm using the lipo with a 1750kv (4268 -size) geard 19/46. I tried it...

I'm not sure myself but from researching it on the Internet y motors are more efficient then d motors & as I said previously y motors respond to timing on the esc.

I'm hoping there is someone out...

Hi

I know that Y wound motor respond better to timing then D wound motors.

I just wanted to know what would happen if I did add timing to a D wound motors? I have a 2.5D 1750kv motor with a...

i think i have found the solution

http://www.amainhobbies.com/product_info.php/cPath/1574_199/products_id/18210/n/Castle-Creations-10-Amp-Adjustable-BEC

i dont want to be running an extra...

i supose that you d have point that from 5.75v-6.0v is not a big difference to be noticed.

If i do decided to get a high voltage servo, i will need to run an external bec right?

Sorry to keep repeating the question again but will the track be ok to be driven on? Especially with all this rain this morning

That does sound like a good idea but the issue I have with that is running an extra battery. I would struggle to secure it in the chassis and there is the added extra weight. Is there another way?

Hi

On my xereun 80amp esc the bec is rated at 5.75v/3amp. I want to give my steering servo the full 6v. i wanted to know can you run a external bec without doing any soldering? Also any advice on...

thanks for the info guys, i will be going for the argos option.

hi could you please take me of the list

wasim iqbal

thank you