what is the correct charge and discharge rate to use on the stock mini 8 batterys?
1100mah 7.2v
I have the accucell 6 charger.
Thanks
Clint
Havent charged a nimh micro battery for a bit. But from memory 1amp was about right for the normal cells that came with the rtr. I had some ib 1400s i used to charge at 1.5 amps and they never got too hot. Some used to charge at 2 amps but i think thats a bit much for those small cells.
Ukmicrorc forum will have all the micro info you will ever need!
between 0.8 and 1.4 would be fine, above that can shorten the life of the cells.
If you want good performance then power-tech do some 1850mah 33c 2s lipos that I tried last night and were very good in comparison to the standard nimhs.
go lipo mate.....it will wake her up!
!IF IN DOUBT BASH HARDER!
1.1 amps but watch the battery closely as they get a little hot after charging and i would recomend lipo`s aswell it will really wake the little thing up and you also get longer runtimes
Thanks for the replies. not gonna go lipo just yet as its my sons buggy hes only five and he crashes it enough as it is![]()