Now then, I am looking to change my Hong Nor X1 crt pro to brushless and dont really know where to start?
what parts will I need, motor, esc, batts, conversion kit etc? how much will these set me back?
i am not sure if this will work.
it is a cheap kit but if it fits it will do the job.
the other people to look into is rc monster they do kits as well but, i am nto to sure if they will ahve for your car.
then you will need to look for 4s lipo packs that fit your budget.
the normaly a hobby wing combo will work fine, this you can look on ebay for.
as in motor size round the 2200 mark and esc is the 120 amp and bigger esc you want to put on to your rc.
then you want a charger to charge up the lipos.
motor & esc combo option 1:
esc & motor option 2:
esc only option 1:
esc option 2:
with these options and depending on your driving you will get round the 15 to 18 min mark for racing time what is not to bad. if you got for better lipos you can squeze out more run time.
then you will need a pinion gear for the motor. i thin k the one you will need is a mod1
Last edited by levontraut; 31-07-2012 at 10:46 AM.
Thanks mate appreciate that.
How did the brushless conversion go?
I have an X1-CRT that I would like to convert to brushless.
It seems RC Monster are the only people who do a specific kit for the X1-CRT.