Servo Saver Problem

[Dewdrop]

Hi All
Hope you all had a good days racing today.

I took out my new kyosho neo Truggy and was having problems with steering.
It was not the servo as it has a KO propo 20kg torque.
My problem was at high speed the car would not turn after having a chat with the lads at the track it was said the servo saver was weak.
I tightened the spring which improved it a bit, but at high speed it still was going straight.
My question is what can I use to replace it.

Bernie

[sean (wildwooly)]

Hi bud have you checked to make sure that the servo is working correctly (holding in the direction its turning) as it could be that there's a problem there? If you have done that then you need to make sure you have tightened the spring in accordance with your instructions... Or you could try using a different kit spring I don't know much about kyosho bit I do know that xray drivers are using a mugen spring in the servo saver on the xray buggy.
I hope you manage to sort it out and I'm sure some other people may have other ways you could sort it as I said I don't really know much about kyosho!
Sean

[Dewdrop]

Hi bud have you checked to make sure that the servo is working correctly (holding in the direction its turning) as it could be that there's a problem there? If you have done that then you need to make sure you have tightened the spring in accordance with your instructions... Or you could try using a different kit spring I don't know much about kyosho bit I do know that xray drivers are using a mugen spring in the servo saver on the xray buggy.
I hope you manage to sort it out and I'm sure some other people may have other ways you could sort it as I said I don't really know much about kyosho!
Sean

Hi Sean
The servo works great, I have completely tightened the spring but when the car is under high throttle it loses steering.

I have ordered a mugen spring I will try that and see how it goes.

Bernie