http://www.maxbashing.com/ en Sat, 18 May 2013 10:21:15 GMT vBulletin 60 http://www.maxbashing.com/mbimages/misc/rss.png http://www.maxbashing.com/ http://www.maxbashing.com/mbforum/showthread.php?47441-FTX-Frenzy-and-ALL-my-nitro-gear&goto=newpost Fri, 17 May 2013 15:17:38 GMT Hi guys, Decided i like 10th buggies more than my nitro and would like to find an associated, so may as well sell all this off. First up the... Hi guys,

Decided i like 10th buggies more than my nitro and would like to find an associated, so may as well sell all this off.

First up the Frenzy

The Shell is a tad battered but still useable by all means.
Recently replaced the front shock tower
Requires a new steering knuckle
Engine is gasket gooped and runs great and has had less than 5 litres of fuel through it with optifuel race 25%
underneath of the car as expected has some scratches etc, it has been run on astro turf.

The Pull start on this kept breaking and there is no cover plate that i know of that definitely fits so i took the T bar off and kept the black cover plate, OWB etc in place and then ran the car on the RB Starter box ill explain in a mo.

Servo wise i have 2 alturn aas750mgs, however one is on my vantage at the moment but if you want both ill put it back in the car, they work great. Radio gear also not supplied potentially as well as i only have 1 tx and rx !

Comes with the stock dish tyres n wheels which have a good amount of tread left as well, no issues there.

To get the car running you would need literally fuel, possibly TX/RX and possibly servo, if you have all that already then just the steering knuckle and you are away!

Also comes with fastrax 4 5 and 6 glow plugs as spare, new exhaust manifold seal, new coupler recently fitted, glow starter with charger and ultimate racing glow plug spanner also

also a 1400mah 6v receiver pack, barely used air filter and after run oils.


a lot of the screws have been replaced/locktite etc, front and center diff had a recent change to 15,000 and 20,000 weight oil rear still has stock goop in

RB Starter box, not used that much, wheel does not have much wear on it and is setup for the frenzy specially, i have all the pegs, comes with 2 orion nimh's 1800mah wired in deans to get you going

Price:
I do not wish to split all this due to the ball ache that will be posting it all, if i split it will be the buggy and the gear and then the starter box with batteries, no odd job combos n weird pms saying can i have a glow plug lol

For all of it £230 posted paypal fees to be covered as well please, split price is to be discussed.

This buggy is what it is, its stood the test of time, runs well, its reliable as well to be honest, nothing has ever broken on it except the knuckle but that was on its way out anyway and at £7 for a pair, cheap to replace.













]]> RC Kits PurcyP http://www.maxbashing.com/mbforum/showthread.php?47441-FTX-Frenzy-and-ALL-my-nitro-gear http://www.maxbashing.com/mbforum/showthread.php?47409-FTX-Carnage-1-10-4WD-RTR-Truck&goto=newpost Fri, 17 May 2013 11:52:23 GMT FTX Carnage 1/10 4WD RTR Truck

Purchased from Lancaster Model & Hobby (£120), 12 months old, excellent condition, no damage.

Also with additional 2400 nimh battery and charger.

27Mhz TX/RX.

£60 collected from Lancaster area or trackside from PRCC (Nr. Blackpool) - Cash on collection/delivery or buyer pays Paypal fees.

Might also be able to deliver (by arrangement) as travel extensively with work.







]]> RC Kits Jesse James http://www.maxbashing.com/mbforum/showthread.php?47409-FTX-Carnage-1-10-4WD-RTR-Truck http://www.maxbashing.com/mbforum/showthread.php?47145-sworkz-with-psp-kit-plus-extras&goto=newpost Tue, 14 May 2013 23:09:04 GMT as above,car is mint condition,its only done two 5 minute heats at slough!! includes psp kit, alloy 3.o and 2.5 rear toe blocks,alloy front upper... as above,car is mint condition,its only done two 5 minute heats at slough!!

includes psp kit, alloy 3.o and 2.5 rear toe blocks,alloy front upper gearbox brace and a few other alloy bits

its got spare shock bladders
shock shafts
springs

manual and box
not sure what its worth so will start at £275.00

pics to follow ]]> RC Kits forbesy http://www.maxbashing.com/mbforum/showthread.php?47145-sworkz-with-psp-kit-plus-extras http://www.maxbashing.com/mbforum/showthread.php?47025-durango-dnx-408-v2-buggy-for-sale-Sold&goto=newpost Tue, 14 May 2013 11:58:22 GMT *_sold thankyou_* i have a durango dnx 408 buggy for sale very good condition as can be seen and hardly been run,i have stripped to the... sold thankyou




i have a durango dnx 408 buggy for sale

very good condition as can be seen and hardly been run,i have stripped to the bone and rebuilt.


it has the full v2 spec kit fitted and comes with some spares,odds n sods,,2 batteries,clutch,manual,spare chassis etc,basically what is in the box pictured.

£140 plus postage which im guessing will be about £15 unless you wish to collect.

i also have some engines,starter box,steerwheel radio i can add for extra if you needed them.













]]> RC Kits fastboy http://www.maxbashing.com/mbforum/showthread.php?47025-durango-dnx-408-v2-buggy-for-sale-Sold http://www.maxbashing.com/mbforum/showthread.php?47009-Agama-A8T-Roller-Sold&goto=newpost Tue, 14 May 2013 07:52:38 GMT Selling due to wanted to raise funds for 1/10 racing. Only Used 4/5 times on Astro, just been fully rebuilt, comes with option springs and option... Selling due to wanted to raise funds for 1/10 racing.

Only Used 4/5 times on Astro, just been fully rebuilt, comes with option springs and option front roll bar spare filters and a used shell.

£170 posted.



]]> RC Kits Chewie http://www.maxbashing.com/mbforum/showthread.php?47009-Agama-A8T-Roller-Sold http://www.maxbashing.com/mbforum/showthread.php?46881-mugen-mbx6-bullitt-218-savox-starterbox-SOLD&goto=newpost Mon, 13 May 2013 18:39:49 GMT Hi gauging intrest before I split mugen mbx6 selling as almost ready to run will just require tx and rx looking for £370 picked up from stoke on... Hi gauging intrest before I split mugen mbx6 selling as almost ready to run will just require tx and rx
looking for £370 picked up from stoke on trent heres whats included
1.mugen mbx6 fully rebuilt with some used spares including chassis spare arms wheels are losi step pins on proline rims, fully boxed with instructions (£130)
2.bullitt 218 with matching bullitt pipe little dink in side but doesnt effect running. (£120)
3.savox 1256 and 1258 servos (£70)
4.fastrax starter box with new gel cell (£50)

although used some nice rc gear the prices in brackets are the estimated used prices gauged on what gets sold on the forum.
no time wasters please these are NOT new so will be marks on some items im in no great rush to sell so no silly offers but everything is negotiable.
heres some pics. Any questions or further pics pm me









]]> RC Kits leestokey http://www.maxbashing.com/mbforum/showthread.php?46881-mugen-mbx6-bullitt-218-savox-starterbox-SOLD http://www.maxbashing.com/mbforum/showthread.php?46729-clearout&goto=newpost Sun, 12 May 2013 20:53:54 GMT here are a few rollers that i need gone.prices include fees and 1st class postage.photos up tomorrow evening.no electrics or engines included. ... here are a few rollers that i need gone.prices include fees and 1st class postage.photos up tomorrow evening.no electrics or engines included.

team c torch truggy, great condition.£80
team c t8t truggy, great condition, new body £125
1/10 corally rdx good condition £45
1/10 corally rdc, needs rear wishbone £35
team magic e4s as new boxed £45
tamiya lunchbox, needs a few bits and tidying up £35
mini pred 3d heli needs slight repair to head,with ali case £45
cheers


]]> RC Kits Gav79tt http://www.maxbashing.com/mbforum/showthread.php?46729-clearout http://www.maxbashing.com/mbforum/showthread.php?46489-Losi-8ight-1-0-Roller-with-Spares&goto=newpost Sat, 11 May 2013 18:28:43 GMT Losi 8ight 1.0 Roller Lightened Out Drives Front And Rear Adjustable Hinge Pin Braces With inserts 2mm Wider Wheel Hexs DE Mud Guards Bearings... Losi 8ight 1.0 Roller
Lightened Out Drives
Front And Rear Adjustable Hinge Pin Braces With inserts
2mm Wider Wheel Hexs
DE Mud Guards
Bearings Replaced One Meeting Ago
2 x Proline Bulldog Bodies (one is split but OK for practice)
3 x Wings
Lots of used spares

£100 Posted


Buyer pays the PayPal fees or sends as gift

Any questions please PM me.

Thanks
Ben





]]> RC Kits DiamondGeezer http://www.maxbashing.com/mbforum/showthread.php?46489-Losi-8ight-1-0-Roller-with-Spares http://www.maxbashing.com/mbforum/showthread.php?46433-Hobao-hyper-7-tq21-rtr&goto=newpost Sat, 11 May 2013 11:47:01 GMT Hyper 7 tq21 fitted with a hyper 21 4 port pull start engine with very good compression In good condition Shell and wing are tatty but rest... Hyper 7 tq21 fitted with a hyper 21 4 port pull start engine with very good compression

In good condition

Shell and wing are tatty but rest of car is strong and sound

Comes ready to run with radio gear

Asking £125.00 posted

PayPal gift or pay the fees please

Feedback on Facebook and eBay



]]> RC Kits Trackside RC http://www.maxbashing.com/mbforum/showthread.php?46433-Hobao-hyper-7-tq21-rtr http://www.maxbashing.com/mbforum/showthread.php?46417-Team-Associated-RC-8-2-Artr-For-sale&goto=newpost Sat, 11 May 2013 11:21:03 GMT Hi Guys I am selling My Associated rc 8.2 complete with extras I have used the car for a season at our local club but now i have a new kit its not... Hi Guys I am selling My Associated rc 8.2 complete with extras I have used the car for a season at our local club but now i have a new kit its not doing alot it comes complete with

Hitec 7965 Servos throttle and steering
Alpha ryan lutz signature motor and matching pipe
1600mha hump pack
aluminium rear hub carriers
Ghea 1.3 8 hole pistons
Kyosho Blue Springs
i also have the vertical castors blocks but they are not fitted but will include in the sale

Note this sale would need transmitter and receiver to complete

£350 with motor and servos

£200 a roller without servos and motor

Pay Pal excepted

]]> RC Kits Arby http://www.maxbashing.com/mbforum/showthread.php?46417-Team-Associated-RC-8-2-Artr-For-sale http://www.maxbashing.com/mbforum/showthread.php?46385-HPI-Savage-XS&goto=newpost Sat, 11 May 2013 09:46:29 GMT Hi gents and ladies! Selling my Savage XS as I need to fund other hobbies.


Basically I've had it since August last year, and it has mostly been on the shelf due to uni work and working weekends, and I'm not really using it, so seeing as I need the money, it needs a new home!


This started life as an RTR model, and I have only really replaced what has broken as it's been a tough little beast, so it's had:
Hobbywing SC8WP ESC - paired with the standard motor as it runs well
Bluebird metal gear buggy servo
Wheelie Bar
Hot Racing centre drive cups
Hot Racing front CVD's (these are great for general driving but are known to break under heavy bashing, the extra steering is nice though)
Custom dirt guards for the rear arms
Hinge pins and C-clips replaced with Traxxas screw pins where necessary


Other than these bits it's been a great little runner, and I'll be sad to see it go! It's in overall good condition, apart from the usual underside scratches as to be expected from a used model. The only two little niggles with this car are that I've dremelled the cover near the motor to allow extra airflow, which might not be to everyones liking but does help cooling, and there is a small crack in the front body mount, however a dot of superglue will fix this. I've been running it like it is for several months with no issue. As I say, other than that it is in great condition! The shell is a little rough, however a nearly new Rockstar themed version will be included too.


As pictures speak a thousand words, here's an essay:

The dremelling to the cover near the motor can be seen here

As it can be seen, the car is in great condition, and has been well looked after in my possession, and has had most of the required upgrades done to it already.


Bearing that in mind, and the cost of a new RTR, I'm after £190 posted, or £195 posted with a flysky receiver - you'll need your own transmitter.


If you have any questions, drop me a PM


Cheers! ]]> RC Kits Matt B http://www.maxbashing.com/mbforum/showthread.php?46385-HPI-Savage-XS http://www.maxbashing.com/mbforum/showthread.php?46353-Hotbodies-D8-Hara-edition-Immaculate&goto=newpost Fri, 10 May 2013 20:54:59 GMT I have my D8 Hara edition up for grabs. History of the car is basically hardly used, I received the car from HPi in November last year and then... I have my D8 Hara edition up for grabs.

History of the car is basically hardly used, I received the car from HPi in November last year and then did 5 meetings in total before they sent me the new D812. The car has been very well looked after and had a full strip down and rebuild prior to pics being taken.

There is also one hell of a lot of spares inc a brand new lightweight Chassis with side plates. 3 sets of front 7 rear wishbones, gearbox cases, new front and rear shock towers.........the list goes on and on and on......Please see pics

I'm after £275 as the spares alone are worth the best part of £200.











Cheers
Mark ]]> RC Kits MrK http://www.maxbashing.com/mbforum/showthread.php?46353-Hotbodies-D8-Hara-edition-Immaculate http://www.maxbashing.com/mbforum/showthread.php?46257-MBX6-Eco-Sold&goto=newpost Fri, 10 May 2013 08:48:00 GMT Im selling my X6E as it doesn't get used much. Its was bought new last year before the coventry E Nationals, used at that event and then at Rd1 @ HNMC this year. I've fitted the front option Ali upper hinge pin holder and also the option rear lower Ali anti squat plate. Its also got the 8 hole 1.2 tapered pistons from mugen fitted

It doesn't come with any electrics but will have a set of wheels and tyres that have been used for 1 run.

Im looking for £230 posted in the UK as a roller with the wheels. I have a set of new spares that can be added to a deal for an extra £35.

Payment is via paypal as a gift or add the 3% fee's, or cash on collection








]]> RC Kits Ross http://www.maxbashing.com/mbforum/showthread.php?46257-MBX6-Eco-Sold http://www.maxbashing.com/mbforum/showthread.php?46193-xb9-roller-and-spares&goto=newpost Thu, 09 May 2013 19:48:11 GMT here is my old xb9 it has always been maintained to a high standard comes with alot of spares bottom arms,hinge pins,shock shafts,gearboxes,full set... here is my old xb9 it has always been maintained to a high standard comes with alot of spares bottom arms,hinge pins,shock shafts,gearboxes,full set of kick up blocks and full set of shock pistons,silver and blue shock springs hopefully everything needed to keep going on a bad day at track.

paypal gift or buyer pays fee £170 or can be collected











]]> RC Kits jimi126 http://www.maxbashing.com/mbforum/showthread.php?46193-xb9-roller-and-spares http://www.maxbashing.com/mbforum/showthread.php?46161-Losi-mini-8-ready-to-run-SOLD&goto=newpost Thu, 09 May 2013 15:02:01 GMT Losi mini 8ight ready to run in excellent hardly used condition with upgrades, only ever used a handful of times indoors on carpet & polished floor
Comes with 2.4 GHZ Spektrum radio gear (handset never used)
Just charge the battery & yr ready to go !!!!!!
Fitted with uprated inolab steering servo
Ezrun 35 amp speed controller...
(Making the buggy a lot more smoother on the throttle & brakes & also a fair bit quicker than stock set up!!)
Front & rear losi aluminium suspension sets (front & rear) with spare plastic inserts, stock plastic mounts are very brittle especially the front.
Blue RPM rod ends fitted (wont pop off like the stock ones)
Jp energy 2100 mah 2 cell 50c lipo battery
Pro painted body shell
Comes with a used set of rally blocks on rims, also a new set of stock mini 8 wheels & tyres
Instruction manuals for buggy, speed controller & suspension mount sets
Can also include original unused bodyshell, servo, & speed controller if required
£155 posted SOLD







]]> RC Kits s3nutt http://www.maxbashing.com/mbforum/showthread.php?46161-Losi-mini-8-ready-to-run-SOLD